This rugged valve offers key performance features found on Husqvarna HRP valves. Built with strength and endurance to handle the challenges of light commercial sites, the HRV is available in a host of variations. Designed for small landscape applications, the HRV is available in two 1″ body configurations: Female National Pipe Thread and PVC Socket. Each model is available with either flow control or a non-flow control lid. Flow Control models include a lever for easy activation of the solenoid. All models feature premium high-quality construction and a rugged diaphragm with support to prevent stress failure.

Features and Benefits:

• Fast and Reliable Flow Control—Quick adjustment with water on or off reduces flow or shuts the valve off completely.
• Balanced Flow Design—Keeps equal pressure on both sides of the diaphragm while the valve is off, effectively increasing the valve’s longevity
• Quick-slip Glue Models Available—For fast, clean installation.
• Strong, Injection-molded Diaphragm—Exceeds industry standards for strength, flexibility and durability.
• Glass-filled Polypropylene Lid—For extra strength.
• Self-cleaning Filter—Pilot-flow 90-mesh (200 micron).
• Internal Bleed Lever—Makes manual (at-the-valve) operation easy and spray-free
• Captive Spring—Captivated Spring stays in place during diss-assembly
• Multi-Drive screws—Don’t worry about which tool to bring, the HRV has 4 captive multi-drive screws which accept Philips, Flat, and 1/4″ Socket
• Solenoid Lever—Available solenoid lever allows for easy manual activation of flow control valves.

Specifications:

• WEIGHT    0.7 lbs
• DIMENSIONS    4.375 × 2.5 × 4.5 in
• OPERATING PRESSURE     80 PSI
• OPERATING PRESSURE RANGE    10 – 150 PSI
• TEMPERATURE RATING    125° F
• SIZE    1"
• CONNECTION TYPE    Female National Pipe thread, PVC Socket
• COMPATIBLE SOLENOID(S)    HRP-SD-RP
• FLOW CONTROL    Yes
• FLOW DESIGN    Reverse Flow
• MATERIAL    PVC
• OPERATING RANGE Flow: 5 to 30 GPM (1 to 115 LPM
• Pressure Range: 15 to 150 PSI (0.7 to 10 Bar)
• DIMENSIONS: Height: 5 ½” (13,8 cm) Width: 4″ (10,8 cm) Length: 4 ½” (10,8 cm)
• Solenoid: 24 VAC 50/60 (Cycle/Sec)
• Inrush: .30 A (7.2 VA) at 60 HZ
• Holding: .19 A (4.6VA) at 60 HZ
• Coil Resistance: 32 OHMS
• Ambient Temperature: Up to 137 F (58.3 C)