Wiggle Wire Lock Base

Wiggle Wire is capable of holding two layers of polyethylene, plus a piece of shade cloth. You simply lock the polyethylene with one wire, then go back and install a second wire to hold the shade cloth in place.

Wiggle Wire is capable of securing greenhouse poly, shade cloth, screening, and a multitude of other flexible materials.

Overlap Wiggle Wire Ends

Overlap wiggle wire one section during installation. Be sure that the pattern is reversed for the top section. See Figure 2 Lock Corners

IMPORTANT: Install12” wire sections wherever poly fastener turns a corner. Be sure to reverse the wire pattern. See Figure 3

Wiggle Wire can also be installed on arched structures. Start at the bottom and follow the bend. Attach the screws every 12”. See Figure 4