Top of the page

Modine Natural Gas 60/48K BTU Separated Combustion Aluminized Steel Heat Exchanger

Item No. 34163300
Separated Combustion Gas-Fired Unit Heater - 60/48K BTU The Hot Dawg� separated combustion garage heater pulls 100% of the combustion air from outside, making this unit ideal for workspaces such as wood shops or a garage where paint or flammable materials are used regularly. The fresh air supply red
Price $1760
price per EACH
EACH

Description

Separated Combustion Gas-Fired Unit Heater - 60/48K BTU

The Hot Dawg� separated combustion garage heater pulls 100% of the combustion air from outside, making this unit ideal for workspaces such as wood shops or a garage where paint or flammable materials are used regularly. The fresh air supply reduces the common concerns about performance and durability that can come when working in a dusty or particulate-laden environment.

Certified for residential, commercial, and industrial use.
  • Draws combustion air from outside the workspace, ensuring the unit always has plenty of fresh, clean air to breathe.
  • Reduces common concerns about dusty, dirty, or humid applications, providing more exceptional durability and reduced maintenance.
  • The sealed compartment protects the combustion gas valve, ignition control, manifold, and burners from the environment.
  • Factory assembled, certified separated combustion saves installation time.
  • Low-profile, lightweight design easily installs 1? from the ceiling with only two angle brackets*.
  • Operates on natural or propane gas; field conversation kits are available.
  • Finger-proof fan guards on all units.
  • Reduces the need for maintenance with the permanently lubricated motor.
  • 100% shut-off with continuous retry to allow for safe ignition in the event the unit doesn�t light on the first try.
  • Right or left-hand controls are available on 30-75 BTU Models by rotating the unit 180 degrees.
  • The power vented model simplifies side-wall or roof venting with the small-diameter vent pipe.
  • Fuel Type: natural or propane gas.
  • Designed, Engineered & Assembled in the USA
  • 10-year warranty on the heat exchanger
Accessories:
  • Concentric and Two-Pipe Vent Kits
  • 30, 60, and 90-degree air deflector hoods
  • Vibration Isolation Kit
  • Summer-Winter Toggle Switch
Product Sell Sheet
Installation & Service Manual
Hot Dawg� Separated Combustion Unit Heater Catalog
Hot Dawg� Troubleshooting Guide
Unit Heater Maintenance Checklist
Things To Consider
  1. How many BTU�s do they need?
  2. What type of heater do they need? (Natural Gas, Electric, Propane)
  3. Do they have 240V power? Do they have Phase I or Phase 3 power?
  4. Do they need a vent stack for separated combustion?
  5. Do you need a thermostat or controller?
  6. How are they circulating or moving heat in the space?


BTUs

Item #
Item Description
Input
Output
Modine Manu. #
Modine Natural Gas 30/24K BTU Separated Combustion Aluminized Steel Heat Exchanger
30000
24000
HDS30AS0111SBAN
Modine Natural Gas 45/36K BTU Separated Combustion Aluminized Steel Heat Exchanger
45000
36000
HDS45AS0111SBAN
Modine Natural Gas 60/48K BTU Separated Combustion Aluminized Steel Heat Exchanger
60000
48000
HDS60AS0111SBAN
Modine Natural Gas 75/60K BTU Separated Combustion Aluminized Steel Heat Exchanger
75000
60000
HDS75AS0111SBAN
Modine Natural Gas 100/80K BTU Separated Combustion Aluminized Steel Heat Exchanger
100000
80000
HDS100AS0111SBAN
Modine Natural Gas 125/100K BTU Separated Combustion Aluminized Steel Heat Exchanger
125000  
100000  
HDS125AS0111SBAN  

Specifications

SIZE
60/48K BTU 115V

Reviews (0)

There are no reviews yet.

Modine Natural Gas 60/48K BTU Separated Combustion Aluminized Steel Heat Exchanger

Item No. 34163300
Separated Combustion Gas-Fired Unit Heater - 60/48K BTU The Hot Dawg� separated combustion garage heater pulls 100% of the combustion air from outside, making this unit ideal for workspaces such as wood shops or a garage where paint or flammable materials are used regularly. The fresh air supply red
Price $1760
price per EACH
EACH

Description

Separated Combustion Gas-Fired Unit Heater - 60/48K BTU

The Hot Dawg� separated combustion garage heater pulls 100% of the combustion air from outside, making this unit ideal for workspaces such as wood shops or a garage where paint or flammable materials are used regularly. The fresh air supply reduces the common concerns about performance and durability that can come when working in a dusty or particulate-laden environment.

Certified for residential, commercial, and industrial use.
  • Draws combustion air from outside the workspace, ensuring the unit always has plenty of fresh, clean air to breathe.
  • Reduces common concerns about dusty, dirty, or humid applications, providing more exceptional durability and reduced maintenance.
  • The sealed compartment protects the combustion gas valve, ignition control, manifold, and burners from the environment.
  • Factory assembled, certified separated combustion saves installation time.
  • Low-profile, lightweight design easily installs 1? from the ceiling with only two angle brackets*.
  • Operates on natural or propane gas; field conversation kits are available.
  • Finger-proof fan guards on all units.
  • Reduces the need for maintenance with the permanently lubricated motor.
  • 100% shut-off with continuous retry to allow for safe ignition in the event the unit doesn�t light on the first try.
  • Right or left-hand controls are available on 30-75 BTU Models by rotating the unit 180 degrees.
  • The power vented model simplifies side-wall or roof venting with the small-diameter vent pipe.
  • Fuel Type: natural or propane gas.
  • Designed, Engineered & Assembled in the USA
  • 10-year warranty on the heat exchanger
Accessories:
  • Concentric and Two-Pipe Vent Kits
  • 30, 60, and 90-degree air deflector hoods
  • Vibration Isolation Kit
  • Summer-Winter Toggle Switch
Product Sell Sheet
Installation & Service Manual
Hot Dawg� Separated Combustion Unit Heater Catalog
Hot Dawg� Troubleshooting Guide
Unit Heater Maintenance Checklist
Things To Consider
  1. How many BTU�s do they need?
  2. What type of heater do they need? (Natural Gas, Electric, Propane)
  3. Do they have 240V power? Do they have Phase I or Phase 3 power?
  4. Do they need a vent stack for separated combustion?
  5. Do you need a thermostat or controller?
  6. How are they circulating or moving heat in the space?


BTUs

Item #
Item Description
Input
Output
Modine Manu. #
Modine Natural Gas 30/24K BTU Separated Combustion Aluminized Steel Heat Exchanger
30000
24000
HDS30AS0111SBAN
Modine Natural Gas 45/36K BTU Separated Combustion Aluminized Steel Heat Exchanger
45000
36000
HDS45AS0111SBAN
Modine Natural Gas 60/48K BTU Separated Combustion Aluminized Steel Heat Exchanger
60000
48000
HDS60AS0111SBAN
Modine Natural Gas 75/60K BTU Separated Combustion Aluminized Steel Heat Exchanger
75000
60000
HDS75AS0111SBAN
Modine Natural Gas 100/80K BTU Separated Combustion Aluminized Steel Heat Exchanger
100000
80000
HDS100AS0111SBAN
Modine Natural Gas 125/100K BTU Separated Combustion Aluminized Steel Heat Exchanger
125000  
100000  
HDS125AS0111SBAN  

Specifications

SIZE
60/48K BTU 115V

Reviews (0)

There are no reviews yet.