Evaporative Cooling for Greenhouses
Kool-Cel with Extruded Gutter
Model CAEG: 4” Kool-Cel Closed Aluminum Top with Extruded Gutter Cooling System
Model CSEG: 6” Kool-Cel Closed Stainless Steel Top with Extruded Gutter Cooling System
Acme CAEG and CSEG evaporative cooling system offers the optimal in installation ease and upkeep
Main Features:
When ordering, select the proper system length CAEG or CSEG with the optional extension in order to make the correct system length.
Additional components are: in-line or 50 gallon tank kit, water valve, pump and optional in-line tank, wrap-around kit. End covers are required for 4” CAEG systems.
Model CSEG: 6” Kool-Cel Closed Stainless Steel Top with Extruded Gutter Cooling System
Acme CAEG and CSEG evaporative cooling system offers the optimal in installation ease and upkeep
Main Features:
- The UV protected gutters and optional aluminum or stainless steel top offers many years of trouble-free operation
- Just glue the sections together and snap in the pad tray
- The gutter may be either mounted on the wall stringer or set on a cement pad. Wall mount uses heavy stainless steel brackets
- ACME offers two unique top systems with the extruded gutter. The special closed top design offers superior protection from debris. The sump pump (70S and smaller) is located in an extension of the gutter located at one end or mid-point
- Re-circulated water is supplied from a submerged pump through an inline filter and water flow control. A sediment trap is included to reduce trash in the recirculating water. In addition a bleed-off tube allows for continual refreshment of the re-circulated water. Fresh water is supplied by way of a Rojo or Topaz water valve
- A plumbing completer kit is available to facilitate installation
When ordering, select the proper system length CAEG or CSEG with the optional extension in order to make the correct system length.
Additional components are: in-line or 50 gallon tank kit, water valve, pump and optional in-line tank, wrap-around kit. End covers are required for 4” CAEG systems.
Learn more about our partner on their website: ACME Fans
Evaporative Cooling for Greenhouses
Kool-Cel with Extruded Gutter
Model CAEG: 4” Kool-Cel Closed Aluminum Top with Extruded Gutter Cooling System
Model CSEG: 6” Kool-Cel Closed Stainless Steel Top with Extruded Gutter Cooling System
Acme CAEG and CSEG evaporative cooling system offers the optimal in installation ease and upkeep
Main Features:
When ordering, select the proper system length CAEG or CSEG with the optional extension in order to make the correct system length.
Additional components are: in-line or 50 gallon tank kit, water valve, pump and optional in-line tank, wrap-around kit. End covers are required for 4” CAEG systems.
Model CSEG: 6” Kool-Cel Closed Stainless Steel Top with Extruded Gutter Cooling System
Acme CAEG and CSEG evaporative cooling system offers the optimal in installation ease and upkeep
Main Features:
- The UV protected gutters and optional aluminum or stainless steel top offers many years of trouble-free operation
- Just glue the sections together and snap in the pad tray
- The gutter may be either mounted on the wall stringer or set on a cement pad. Wall mount uses heavy stainless steel brackets
- ACME offers two unique top systems with the extruded gutter. The special closed top design offers superior protection from debris. The sump pump (70S and smaller) is located in an extension of the gutter located at one end or mid-point
- Re-circulated water is supplied from a submerged pump through an inline filter and water flow control. A sediment trap is included to reduce trash in the recirculating water. In addition a bleed-off tube allows for continual refreshment of the re-circulated water. Fresh water is supplied by way of a Rojo or Topaz water valve
- A plumbing completer kit is available to facilitate installation
When ordering, select the proper system length CAEG or CSEG with the optional extension in order to make the correct system length.
Additional components are: in-line or 50 gallon tank kit, water valve, pump and optional in-line tank, wrap-around kit. End covers are required for 4” CAEG systems.
