Vent & Curtain Drive System by Micro-Grow

Vent & Curtain Drive System by Micro-Grow

STRONG, COMPACT, RELIABLE are Lock products. Lock Drives are known globally as the finest, when it comes to accuracy with precise opening and closing positions due to its limit switch system. These limits feature Swiss made micro switches that are set by tightening three Allen head screws in each direction. Once they are set they will continue to run for many years without any attention. The EWA 12, 14 and 16 units have safety limits. There is an extra micro switch in each direction that will cut off the power to the motor if the system is forced past the stopping point.

The motors are operated by the Micro Grow Series 100 or Series 200 vent controls. The Series 100 and 200 provide on/off or automatic operation. The on/off setting provides manual operation. For automatic operation they require a 24 volt signal from a Micro Grow environmental controller or virtually any greenhouse environmental control system.

The Series 100 and 200 feature two contactors, hookups for the limit switches and a thermal overload protection switch. A transformer is optional. All Micro Grow products are built to UL specifications and listing.

Micro-Grow Vent and Shade Motor Controls

Series 100 Slave Control
For direct connection to a Growmaster Procom or Growcom Control System, Ventmate Control System or to run additional motors connected to a Master Vent Control. Order one control for every motor used.

Series 100 Master Control

Includes a built-in 24 VAC transformer. Use with a Ventstat Control for multiple stages or a simple thermostat for open and close operation only. Order a Master for the first motor only in a series of motors. Order Slaves for each additional motor.

Series 100 Shade Control
Operates shade system motors. Includes a built-in 24 VAC transformer, as well as an internal 24 hour time clock. Order a companion Shadestat for automatic operation of a shade system based on solar levels.

Series 200 Vent and Shade Controls
These larger rated systems will accommodate three phase motors with five wire hook up (115/230 volt, single phase)

Lock Gearbox Accessories

Side Mounting Plates for pad and roof vents.  Sizes: 8.5" or 22"

To ensure your order's accuracy, please carefully READ ALL PARTS of chart below. Examine model number, specifications, etc. of each item before entering a quantity.  PLEASE NOTE: Prices subject to change without notice. Shipping, handling and freight charges are not included in prices shown.

Catalog #Product InformationSize / Spec.Weight LbsUnit of MeasureQty Per CasePrice Break QuantityPriceQuantity
  
Vent & Curtain Drive System by Micro-Grow
29-3081-1EWA12.2503 220NM2,212 IN LB3.7/2.0115/23032,210 IN LB-EA(?)-1 --- UPWholesale Only
29-3081-9EWA12.25032,210 IN LB-EA(?)-1 --- 1$1,430.00
Micro-Grow Vent and Shade Motor Controls
29-3045-1SERIES 100 SLAVE CONTROL REQUIRES A 24 VOLT POWER SOURCESERIES 100-EA(?)-1 --- UPWholesale Only
29-3045-9SERIES 100 SLAVE CONTROLSERIES 100-EA(?)-1 --- 1$346.15
29-3046-1SERIES 100M MASTER CONTROL MASTER, INCLUDES A TRANSFORMERSERIES 100M-EA(?)-1 --- UPWholesale Only
29-3046-9SERIES 100M MASTER CONTROLSERIES 100M-EA(?)-1 --- 1$370.57
29-3047-1SERIES 100SH SHADE CONTROL SHADE, INCLUDES A TRANSFORMER AND TIMERSERIES 100SH-EA(?)-1 --- UPWholesale Only
Vent & Curtain Drive System by Micro-Grow
29-3083-1EWA12.1501 150NM1300 IN LB-EA(?)-1 --- UPWholesale Only
29-3083-9EWA12.15011300 IN LB-EA(?)-1 --- 1$1,370.00
29-3084-1EWA12.4503 450NM4,000 IN LB-EA(?)-1 --- UPWholesale Only
29-3085-1EWA14.6003 600NM5,300 IN LB-EA(?)-1 --- UPWholesale Only
29-3086-1EWA14.3503 350NM3,000 IN LB-EA(?)-1 --- UPWholesale Only
29-3086-9EWA14.35033,000 IN LB-EA(?)-1 --- 1$1,510.00
Lock Gearbox Accessories
29-3087-1MPL 42 11US 8.5 SIDE MOUNTING PLATE FOR PAD & ROOF VENTS8.5"-EA(?)-1 --- UPWholesale Only
29-3087-9MPL 42 11US8.5"-EA(?)-1 --- 1$24.35
29-3089-1MPL 42 1158 22 SIDE MOUNTING PLATE FOR PAD & ROOF VENTS22"-EA(?)-1 --- UPWholesale Only
29-3089-9MPL 42 115822"-EA(?)-1 --- 1$31.30