- This blower is used to inflate two layers of polyethylene greenhouse covering
- Can provide heat savings of up to 40% This blower has automatic-reset thermal protection which shuts off the motor should excessive temperatures develop
- An adjustable air inlet damper is included
Used for stapling poly film to a wood frame. Just position film over frame tape over film, and then staple every 4”.
Designed to be used with the above adjustable blower. Made of heavyweight aluminum, complete with bolts, nuts, washers and complete installation instructions.
For use in connecting double layer polyethylene from roof to side wall to allow pressurized air in both locations. 24” long.
The use of outside air inflation helps reduce condensation between double layer polyethylene. System includes blower, exhaust air deflector, mounting bracket, 72” inlet air hose and air inlet with locking ring. The four port air deflector reduces film deterioration by directing air away from the poly layer. White cap diffuser reduces degradation and eliminates air flow restrictions. The inlet hose may be cut any desired installation length. 115 volt, Hz, 1/125 hp, 60 CFM.
Used to measure air pressure inside the pillow formed by inflated 2-layer poly cover on a greenhouse. This meter uses from .05 to +3.0” of water column. Pillow pressure should be adjusted to .2” for hot days to .45” on cold and windy days. Mount on vertical support and connect tubing between gauge and polyfilm. Includes 8’ double column plastic tubing, connector fittings, mounting screws, red oil indicator, and level for leveling unit.
To ensure your order's accuracy, please carefully READ ALL PARTS of chart below. Examine model number, specifications, etc. of each item before entering a quantity. PLEASE NOTE: Prices subject to change without notice. Shipping, handling and freight charges are not included in prices shown.
|Catalog #||Product Information||Size / Spec.||Weight Lbs||Unit of Measure||Qty Per Case||Price Break Quantity||Price||Quantity|
|26-7000-1||MODEL4C440||115V-60CFM||4.67||EA(?)||-||1 --- 5||Wholesale Only|
|26-7000-2||MODEL4C440||6/CS 115V||28.04||CS(?)||6||1 --- UP||Wholesale Only|
|26-7000-9||MODEL4C440||115V||4.67||EA(?)||-||1 --- UP||$113.00|
|White Vinyl Batten Tape|
|26-6005-1||-||3/4" X 500'||7.5||EA(?)||-||1 --- 3||Wholesale Only|
|26-6005-2||-||4 X 500'||30||CS(?)||4||1 --- UP||Wholesale Only|
|26-6005-9||-||3/4" X 500'||7.5||EA(?)||-||1 --- UP||$60.84|
|Adjustable Blower Mounting Kit|
|26-7003-1||-||-||0.48||EA(?)||-||1 --- UP||Wholesale Only|
|26-7003-9||-||-||0.48||EA(?)||-||1 --- 1||$42.00|
|26-7005-1||-||-||1||EA(?)||-||1 --- UP||Wholesale Only|
|26-7005-9||-||-||1||EA(?)||-||1 --- 1||$29.70|
|Mark II Manometer|
|26-7010-1||MODELl 25||MODEL 25||-||EA(?)||-||1 --- UP||Wholesale Only|
|26-7010-9||MODEL 25||MODEL 25||-||EA(?)||-||1 --- 1||$63.50|