Benefits:

1. Arrives assembled and ready to use.
2. All sides are covered with 8 mm twin wall.
3. Aluminum extrusions are used to secure lexan panels allowing for thermal movement.
4. Edges of Galvanized Steel formed to reduce sharp edges.
5. Hinge pins are removable, allowing roof panels to be removed for planting or cleaning.
6. Two Hinges per roof panel.
7. Roof Panels can be locked closed or up to 14” of adjustable venting.
8. Galvanized frame is constructed from formed sheet and tubing.
9. Sits flat on the ground.

Specifications for Standard Cold Frames:

1. Front Height 18”
2. Back Height 30”
3. Depth 48”
4. Length 48” or 96”
5. Top Slopes  for good light transmission
6. 8 mm Verolite Polycarbonate Panels are used for strength
7. 16 Gauge formed sheet and 18 gauge tubing skeleton frame.

Specifications for Custom Height Cold Frames:

Specifications are the same as described above with the following exceptions:

1. Specify Front Height, back will be 12” higher
2. Lengths available determined by shipping method up to 24’ possible Hummert Delivery.

Options:

1. PLL - Pneumatic Lid Lifts make the Roof panels feel weightless. One required per roof panel. If purchased with a Commercial Cold Frame they will be installed.
2. TC - Temperature Controlled Vent.  User adjustable to open or close a lid panel based on temperature inside the cold frame.  This product inclides the PLL.  Do NOT use in windy areas.  If purchased with a a cold frame it will be installed free of charge.